제품 사진 사양
Securing flange
3 605 700 043
Mounting for securing flange: Unscrew the thread ring with a hook spanner (left-hand thread!) and screw in the securing flange. The motor can be screwed onto the clamping device at the securing flange with two screws. The flanges can be screwed onto the motors on the power drive end if a threaded tensioning ring is unscrewed first!
Designation Motors of the 120 W model series
Thread M 26 x 1 Links
Dimension a 51 mm
Dimension d - diameter 7 mm
Securing flange
3 605 700 047
Mounting for securing flange: Unscrew the thread ring with a hook spanner (left-hand thread!) and screw in the securing flange. The motor can be screwed onto the clamping device at the securing flange with two screws. The flanges can be screwed onto the motors on the power drive end if a threaded tensioning ring is unscrewed first!
Designation Motors of the 740 W model series
Thread M 50 x 1 Links
Dimension a 70 mm
Dimension d - diameter 9 mm
Securing flange
3 605 700 044
Mounting for securing flange: Unscrew the thread ring with a hook spanner (left-hand thread!) and screw in the securing flange. The motor can be screwed onto the clamping device at the securing flange with two screws. The flanges can be screwed onto the motors on the power drive end if a threaded tensioning ring is unscrewed first!
Designation Motors of the 180 W model series
Thread M 30 x 1 Links
Dimension a 51 mm
Dimension d - diameter 7 mm
Securing flange
3 605 700 045
Mounting for securing flange: Unscrew the thread ring with a hook spanner (left-hand thread!) and screw in the securing flange. The motor can be screwed onto the clamping device at the securing flange with two screws. The flanges can be screwed onto the motors on the power drive end if a threaded tensioning ring is unscrewed first!
Designation Motors of the 370 W/300 W model series
Thread M 35 x 1 Links
Dimension a 57 mm
Dimension d - diameter 7 mm
Securing flange
3 605 700 046
Mounting for securing flange: Unscrew the thread ring with a hook spanner (left-hand thread!) and screw in the securing flange. The motor can be screwed onto the clamping device at the securing flange with two screws. The flanges can be screwed onto the motors on the power drive end if a threaded tensioning ring is unscrewed first!
Designation Motors of the 550 W/740 W model series
Thread M 45 x 1 Links
Dimension a 70 mm
Dimension d - diameter 9 mm
Keyless chuck
1 608 572 024
Designation Chuck capacity 1-13 mm
Thread Bohrspindelgewinde 1/2"-20 UNF-2A
Keyless chuck
2 608 572 067
Designation Chuck capacity 1-10 mm
Thread Bohrspindelgewinde 3/8"-24 UNF-2A
Collet chuck, 3/8" thread
3 608 570 003
Use for drills, part number 0 607 154 101
Axial compensation
3 607 030 018
Thread 1/4" Skt.; 1/4" SWF